HQView320 header
Harnessing the power of the Reon™ video processor running state of the art HQV algorithms with expertly designed hardware and firmware from Calibre, HQView320 is a compact yet high performance image scaler with HDMI/DVI/Component/VGA input capability and HDMI/DVI output which provides stunning image quality for professional, broadcast and corporate AV users.

HQView320 includes 4-sided soft edge blend for seamless blending of multiple projectors and flexible geometry correction functions able to correct image shape and projector misalignment by dragging and dropping each image corner, or by pin, barrel, rotation, or by keystone and rotation.

Full warp mapping is also supported by HQView320. A flexible and intuitive PC application is included for easy warp map creation, or third-party generated warp maps can also be processed from automatic image alignment systems.

  • Best in class professional image processing in a compact affordable module
  • Superior de-interlacing reduces image flicker and artefacts
  • Remove picture noise from poor quality video sources, improve image detail
  • Powerful geometry correction for off-axis projection, pin/barrel and image rotation
  • 4-Sided soft edge blend for tiling multiple projectors to produce large images
  • Flexible warp mapping for curved screen projection, simulation and 3D alignment
  • HDMI, DVI, VGA Analog, Component inputs for signals up 1080p & WUXGA
  • HDMI/DVI output up to 1080p/WUXGA
  • Flexible color calibration controls
  • Gamma controls
  • 10-bit signal inputs, 12-bit internal processing
  • Selectable processing versus latency: best picture and low latency modes
  • Latency as low as 0.25-frame progressive inputs, 1.25-frames interlaced inputs
  • USB port for in-field firmware updates
  • Programmable customer logo on menu
  • TCP/IP remote control and Web Server
  • Easy to navigate self-explanatory OSD menus
  • Motion adaptive per pixel video de-interlacing, HD & SD
  • Multi-directional diagonal de-interlace filter
  • Automatic 3:2 & 2:2 pull-down detection with automatic film/video/video over film detection
  • Chroma and Luma transient improvement
  • Edge anti-aliasing
  • 4-field full resolution SD & HD processing
  • 4D Motion, Noise Adaptive HQV noise reduction for spatial and temporal noise
  • Codec noise reduction for mosquito and block compression noise
  • Powerful geometry correction capabilities
  • Image rotation, pin/barrel correction
  • 4-Sided soft edge blend
  • Flexible warp mapping


1x Component analog video YPbPr(S) or RGBS/RGsB via 3 or 4 x BNC jack
1x DVI/HDMI with HDCP via DVI-I connector, supports HDMI with HDCP, 8/10/12 bit video compatible
1x VGA analog via DVI-I connector (common with DVI/HDMI input)

Supported video formats
HD 720p, 1080i, 1080psf (psf digital only), 1080p23.97/24/25/30, 1080p30, 1080p59.94, 1080p60
ED 480p, 576p
SD 625i (576i), 525i (480i)
Common Versa graphics formats from 640x480 to 1920x1200 (with reduced blanking for 1920x1200 and 1600x1200 modes)


1x DVI/HDMI with HDCP (HDMI with deep color 8/10/12 bit support, via DVI connector).

Supported Output formats:
Common VESA formats from 640x480 to 1920x1200, 720p, 1080p
Selectable I/O lock mode, or frame rate conversion mode
Selectable aspect ratio conversion, or incoming aspect ratio preserve mode

User Controls
Remote control via RS232, TCP/IP API and Web Server.
PC-based Warp Map Generator tool.
Keypad for OSD menu access
USB port for uploading software updates and new features.

Power Requirements
12VDC@approx 1.5A, external 100-265VAC PSU included.

3-years return to base warranty covers parts and labor, shipping excluded.

HQView320 comparison
Calibre UK Ltd,
Cornwall House, Cornwall Terrace,
West Yorkshire
queens award logoEurope: proavsales@calibreuk.com
+44 1274 394125
USA: usasales@calibreuk.com
Web: www.calibreuk.com
Issue 2.1 26th Feb 2014 All Trademarks Acknowledged. E&OE Specification subject to change without notice.


Microsoft .NET is required for the warp generator to function, the link below is to the Microsoft website and not a download from our website. The Warp generator software will only work with 320/325, 420 and 520/530 units.

.NET Framework v3.5

The universal updater must be installed before any firmware can be loaded onto your unit.

You can find our firmware revision history .