HQView420

HQView420 header
Harnessing the power of the Reon™ video processor running state of the art HQV™ algorithms with expertly designed hardware and firmware from Calibre, HQView420 is a highly flexible image scaler which provides stunning image quality for professional, broadcast and corporate AV users.HQView420 includes 4-sided soft edge blend for seamless blending of multiple projectors and includes flexible geometry correction functions able to correct image shape and projector misalignment by dragging and dropping each image corner, or by pin, barrel, rotation or by keystone and rotation.Full warp mapping is also supported by HQView420. A flexible and intuitive PC application is included for easy warp map creation, or third-party generated warp maps can also be processed form automatic image alignment systems.

  • Best in class professional image processing in a compact affordable 1U format
  • Use as a routing switcher and universal interface for DVI or HDMI switching and distribution systems, projectors and displays
  • Improve video image quality with better detail and clarity
  • Superior de-interlacing reduces image flicker and artefacts
  • Remove picture noise from poor quality video sources
  • Powerful geometry correction for off-axis projection, pin/barrel and image rotation
  • 4-Sided soft edge blend for tiling multiple projectors to produce large images
  • Flexible warp mapping for curved screen projection, simulation 3D alignment
  • HDMI, DVI, VGA Analog, Component YPbPr, RGBS/RGsB, Composite, S-Video & HD-SDI inputs with signal compatibility up to 1080p & WUXGA
  • HDMI/DVI & VGA Analog outputs
  • Motion adaptive per pixel video de-interlacing, HD & SD
  • Multi-directional diagonal de-interlace filter
  • Automatic 3:2 & 2:2 pull-down detection with automatic film, video and video over film detection
  • Chroma and Luma transient improvement
  • Edge anti-aliasing
  • 4-field full resolution SD & HD processing
  • 4D Motion, Noise Adaptive HQV noise reduction for spatial and temporal noise
  • Codec noise reduction for mosquito and block compression noise
  • Direct input selection keys allow input selection without using menu system
  • Flexible color calibration controls
  • Gamma controls
  • 10-bit signal inputs, 12-bit accurate internal processing
  • Selectable processing versus latency: best picture and low latency modes
  • Latency as low as 0.25-frame progressive inputs, 1.25-frames interlaced inputs
  • USB port for in-field firmware updates
  • Programmable customer logo on menu
  • TCP/IP remote control and Web Server
  • Easy to navigate self-explanatory OSD menus
  • Powerful geometry correction capabilities
  • Image rotation, pin/barrel correction
  • 4-Sided soft edge blend
  • Flexible warp mapping

Inputs

2x Composite Video CVBS (NTSC, PAL & SECAM),
1x via BNC jack and 1x via Cinch/RCA
1x YC/S-Video via 4 pin mini DIN
1x Component analog video YPbPr(S) or RGsB/RGBS via 3 or 4 x BNC jack
1x HDMI with HDCP, 8/10/12 bit video compatible 10-bit internal processing depth. Audio strip-off of SPDIF compatible formats
1x DVI with HDCP
1x SVGA Analog via 15HDD
1x HD-SDI, accepts SD and HD SDI signals via BNC

Supported video formats
HD 720p, 1080i, 1080psf (psf digital only)
1080p23.97/24/30, 1080p30, 1080p50, 1080p59.94, 1080p60
ED 480p, 576p (not via SDI)
SD625i (576i), 525i (480i)
Common VESA graphics formats from 640x480 to 1920x1200 (with reduced blanking for 1920x1200 and 1600x1200 modes)

Multi standard support for CVBS & YC in PAL, NTSC, SECAM formats with selectable 3D comb for composite

 

Outputs

1x DVI/HDMI with HDCP (HDMI with deep color 8/10/12 bit support, via DVI connector)
1x VGA Analog via 15HDD
1x S/PDIF digital audio via RCA

NB: VGA Analog output is disabled with HDCP-encrypted input

Supported Output formats:
Common VESA formats from 640x480 to 1920x1200, 720p, 1080p
Selectable I/O lock mode, or frame rate conversion mode
Selectable aspect ratio conversion

User Controls
Remote control via RS232, TCP/IP API and Web Server.
PC-based Warp Map Generator tool
Keypad for direct input selection and control of common adjustments as well as OSD menu access
USB port for uploading software updates and new features

Power Requirements
100-264VAC, 30W typical

Warranty
3-years return to base warranty covers parts and labor, shipping excluded.

Note: PIP and edge blend are mutually exclusive so cannot be used simultaneously

HQView420 comparison
HQView420 fr-bk
Calibre UK Ltd,
Cornwall House, Cornwall Terrace,
Bradford,
West Yorkshire
BD8 7JS
queens award logoEurope: proavsales@calibreuk.com
+44 1274 394125
USA: usasales@calibreuk.com
Web: www.calibreuk.com
Issue 2.1 26th Feb 2014 All Trademarks Acknowledged. E&OE Specification subject to change without notice.

Notes:

Microsoft .NET is required for the warp generator to function, the link above is to the Microsoft website and not a download from our website. The Warp generator software will only work with 320/325, 420 and 520/530 units.

.NET Framework v3.5

The universal updater must be installed before any firmware can be loaded onto your unit.

You can find our firmware revision history .

Documents



Software


Firmware