HQView325 header
Harnessing the power of the ReonTM video processor running state of the art HQVTM algorithms with expertly designed hardware and firmware from Calibre, HQView325 is a highly flexible warp and blend scaler for professional, broadcast and corporate AV users.HQView325 features 4-sided soft edge blend with multi-region black level correction for seamless blending of multiple projectors. It also includes flexible geometry correction functions able to correct image shape and projector misalignment by dragging and dropping each image corner, or by pin/barrel, rotation or by keystone and rotation.Full warp mapping is also supported by HQView325. A PC application is included for easy warp map creation or third-party generated warp maps can also be processed from automatic image alignment systems making HQView325 ideal for stacked projector alignment and curved screen multi-projector tiling.HQView325 has digital I/O compatible with DVI and HDMI including deep colour support.
  • Best in class professional image processing in a compact affordable 1U format
  • Improve video image quality with better detail and clarity
  • Powerful geometry correction for off-axis projection, pin/barrel, image rotation
  • 4-Sided soft edge blend for tiling multiple projectors to produce large images
  • Flexible warp mapping for curved screen projection, simulation and 3D alignment
  • HDMI, DVI & VGA inputs with signal compatibility up to 1080p & WUXGA
  • HDMI/DVI multifunction output
  • Motion adaptive per pixel video de-interlacing, HD & SD
  • Multi-directional diagonal de-interlace filter
  • Automatic 3:2 & 2:2 pull-down detection with automatic film, video and video over film detection
  • Chroma and Luma transient improvement
  • Edge anti-aliasing
  • 4-field full resolution SD & HD processing
  • 4D Motion, Noise Adaptive HQV noise reduction for spatial and temporal noise
  • Codec noise reduction for mosquito and block compression noise
  • Direct input selection keys allow input selection without using menu system
  • Flexible color calibration controls
  • Gamma controls
  • Selectable processing versus latency: best picture and low latency modes
  • Latency as low as 0.25-frame progressive inputs, 1.25-frames interlaced inputs
  • I/O Lock and Free Run selectable output modes
  • USB port for in-field firmware updates
  • Programmable customer logo on menu
  • TCP/IP remote control and Web Server
  • Easy to navigate self-explanatory OSD menus
  • Powerful geometry correction capabilities
  • Pan, Zoom, Tilt
  • Image rotation, pin/barrel correction
  • 4-Sided edge blend with 48-bit processing & multi-region black level correction
  • Flexible warp mapping


1x HDMI with HDCP support, 8/12 bit deep colour compatible. Audio de-embed from HDMI of SPDIF compatible formats
1x DVI with HDCP support
1x VGA Analog via 15HDD

Supported video formats
HD 720p, 1080i, 1080psf, 1080p23.97/24/25/30, 1080p30, 1080p50, 1080p59.94, 1080p60
ED 480p, 576p
SD 625i (576i), 525i (480i)
Common VESA graphics formats from 640x480 to 1920x1200 (with reduced blanking for 1920x1200 and 1600x1200 modes)


1x DVI/HDMI with HDCP (HDMI with deep color 8/10/12 bit support, via DVI connector)
1x S/PDIF digital audio via RCA

Supported Output formats:
DVI/VGA common VESA formats 640x480 to 1920x1200, 720p, 1080p
Selectable I/O lock or frame rate conversion mode
Selectable aspect ratio conversion

User Controls
Remote control via RS232, TCP/IP API and Web Server.
PC-based Warp Map Generator tool
Keypad for direct input selection and control of common adjustments as well as OSD menu access.
USB port for uploading software updates and new features

Power Requirements
100-264VAC, 35W typical

3-years return to base warranty covers parts and labor.

HQView compare
HQView325 fr-bk
Calibre UK Ltd,
Cornwall House, Cornwall Terrace,
West Yorkshire
queens award logoEurope: proavsales@calibreuk.com
+44 1274 394125
USA: usasales@calibreuk.com
Web: www.calibreuk.com
Issue 1.4 26th Feb 2014 All Trademarks Acknowledged. E&OE Specification subject to change without notice.



Microsoft .NET is required for the warp generator to function, the link below is to the Microsoft website and not a download from our website. The Warp generator software will only work with 320/325, 420 and 520/530 units.

.NET Framework v3.5

The universal updater must be installed before any firmware can be loaded onto your unit.

You can find our firmware revision history .